Differences

This shows you the differences between two versions of the page.

--- mindeedcost:minimum_deed_specs [2022/10/25 21:49] – freth
+++ mindeedcost:minimum_deed_specs [2022/10/25 22:17] (current) – freth
@@ Line 1: / Line 1: @@
-===== Minimum Deed Specs =====
+===== Deeding =====
+//NOTE:  Three months of upkeep is included in the overall initial cost, and is deposited into settlement upkeep.//
+==== Overview ====
+=== Coins ===
 * g = Gold
@@ Line 6: / Line 12: @@
 * i = Iron
-^ One Coin ^ Is Equal To Coins ^
+^ Coin ^ Is Equal To ^
 | 1g | 100s |
 | 1s | 100c |
 | 1c | 100i |
-* One deed tile costs 1c to purchase and has a 20i upkeep.
+=== Deed Costs ===
-* 1 perimeter tile costs 50i to purchase and has a 5i upkeep.
-* Upkeep minimum is 1s, which means if your upkeep is less, it is rounded up to 1s.
+=== Purchase of Tiles ===
-* Decay sets in when upkeep drops below 30 days (Mythmoor).
+^ Tile ^ Cost ^
+| 1 | 1c |
+=== Monthly Upkeep ===
+^ Tile ^ Upkeep ^
+| 1 | 20i |
+NOTE:  Minimum monthly upkeep is 1s.  Anything less is rounded up.
+=== Perimeter Cost ===
+Your deed comes with a 5 tile perimeter for free.  Non-citizens cannot build within the perimeter and decay is faster within the perimeter.
-//NOTE:  3 months of upkeep are included in the initial cost of the deed purchase, which adds 3 months upkeep to the settlement coffers.
+^ Tile ^ Cost ^
-//
+| 1 | 50i |
-==== Absolute Minimum Deed Cost and Size ====
-x5x5x5 N, S, E, W from token tile (121 tiles or 11x11)
+^ Tile ^ Upkeep ^
+| 1 | 5i |
-* 1s 21c purchase of tiles (121 x 1c per tile)
-* 1s upkeep per month (x3 from the outset, 3 months upkeep upfront)
+//NOTE: Decay sets in when upkeep drops below 30 days (Mythmoor).//
-==== Best Minimal Deed Cost and Size ====
-=== Just Below 1s Upkeep ===
+==== Default Minimal Deed Configuration ====
-x10x11x11 N, S, E, W from token tile (483 tiles or 21x23)
+^ Setting ^ Size ^ Number of Tiles ^ Tile Purchase Price ^ Upkeep ^ Total Cost ^
+| 5x5x5x5 | 11x11 | 121 | 1s 21c | 3s (1s x 3) | 4s 21c |
-* 4s 83c purchase of tiles (483 x 1c per tile)
+NOTE:  Since upkeep minimum is 1s per month, it doesn't make sense to use this configuration as you're not getting the maximum tiles for the money.
-* 96c 60i upkeep per month (x3 from the outset, 3 months upkeep upfront)
-* 7s 83c total cost to deed
+==== Minimal Example 1: Just Below 1s Upkeep ====
+^ Setting ^ Size ^ Number of Tiles ^ Tile Purchase Price ^ Upkeep ^ Total Cost ^
+| 10x10x11x11 | 21x23 | 483 | 4s 83c | 3s (96c 60i rounded up to 1s x 3) | 7s 83c |
-=== Just Above 1s Upkeep ===
-x11x11x11 N, S, E, W from token tile (506 tiles or 22x23)
+==== Minimal Example 2: Just Above 1s Upkeep ====
-* 5s 6c purchase of tiles (506 x 1c per tile)
+^ Setting ^ Size ^ Number of Tiles ^ Tile Purchase Price ^ Upkeep ^ Total Cost ^
+| 10x11x11x11 | 22x23 | 506 | 5s 6c | 3s (1s 1c 20i rounded down to 1s x 3) | 8s 6c |
-* 1s 1c 20i upkeep per month (x3 from the outset, 3 months upkeep upfront) **See note below**.
-* 8s 6c total cost to deed (5s 6c + (1s * 3))
-//NOTE:  If the upkeep is low enough, below a certain threshold, the upkeep will be rounded down to 1s.  I do not know what that threshold is (I assume 49c or less), but you can see it is rounding down to 1s in the calculation above, which is taken directly from a deed test in WU.  However, I think the actual upkeep on a monthly basis after the fact is charging the 1c 20i.  This is an assumption until it can be tested.//